The Blog

Excavators are indispensable parts of any heavy construction work. Most of you are already aware of the fact that excavators primarily consist of a house, bucket, stick, and boom. Depending on the nature of job, excavators are available in the market in a wide range of configurations. Some of the most common forms of excavators found in construction sites are backhoes, dump trucks, end loaders, scrapers, bulldozers, etc. Track hoe is a machine with a large boom that is used for digging deeper trenches and holes. Bulldozers are tracked machines that have large blades so that they can push a large volume of materials away from the site. By attaching a scoop or bucket at the end of a hinged arm, excavators can dig trenches in a large scale. Excavators can also be used for efficient loading and unloading of materials such as concrete, stone, debris, dirt, etc. Mechanical thumbs are often attached with excavators to handle large materials like pole, pipes, etc.

Scrapers are extremely important functional components of any excavator. This part is responsible for dragging the machine partially, scraping down the spots in the site that are high, and deposition of earth in the areas that are low. Scrapers are an absolute necessity in large sites such as road construction. Wheel loaders or large end loaders are another important excavator part that help the machine to turn sharply while dump trucks are loaded. They utilize a steering system that in turn, relies on a couple of strong drive axles. As a result, the buckets are able to carry enormous loads without the risk of steering knuckle breakage. Instead of regular rubber tires, spiked-steel wheels are used in specific types of terrains, to generate an increased torsion. However, this type of excavator equipment special transportation facility as they can not operate on roads.

North American Tractor & Excavator Parts has been the most trusted name throughout North America since more that four decades in offering top class excavator parts in different infrastructure development, forestry, construction, and mining projects. The awe inspiring range of excavator parts at Natparts includes

• Track Chains: Our hardened track chains are known for extraordinary seal-ability and long life. Deeper heat treating is possible because these are forged with carbon steel.
• Track Rollers: Our track rollers are boron steel alloy forged and then hardened to prevent loosening of the bushings. Maximum wear life is ensured by deep heat treatment along the outside diameter.
• Track Adjusters: The assembly consists of  mounting flanges, recoil springs, grease valves, and cylinder assemblies.
• Recoil Springs: Chrome Silicon made for superior hardness and performance.
• Swing Bearings. We have bearing available from 24 to 96 inches outside diameters. Used extensively in logging machine, construction machinery, and a wide range of industrial equipment.

Bucket Springs/Bushings: Our pins and bushings for hydrauli

Tweet